{"product_id":"adro-at-r1-swan-neck-wing-pre-preg-carbon-fibre-flat-end-plates-by-adro","title":"ADRO AT-R1 Swan Neck Wing Pre-Preg Carbon Fibre Flat End Plates by Adro","description":"\u003cp\u003eChange your ADRO AT-R1 swan neck wing into a full RS specification with ADRO's pre-preg carbon fibre flat end plates. These end plates replace the standard curved end plates, delivering a wider, more bold visual profile at the rear and completing the full competition appearance of the AT-R1 wing assembly. Forge Automotive supplies these end plates and can fit them at our Darwen and Leeds sites.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This product includes the flat end plates only. It does not include the main wing plate, aluminium brackets or trunk bracket. These end plates are only compatible with the ADRO AT-R1 swan neck wing - not with any other wing system.\u003c\/p\u003e\n\u003cp\u003eThe AT-R1 swan neck wing is available separately for the BMW F8X M3\/M4, BMW F87 M2 and Toyota GR86\/Subaru BRZ.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePre-preg carbon fibre flat end plates for ADRO AT-R1 swan neck wing\u003c\/li\u003e\n\u003cli\u003eConverts to full RS\/competition flat end plate specification\u003c\/li\u003e\n\u003cli\u003eCompatible with AT-R1 wings for BMW F8X M3\/M4, BMW F87 M2 and Toyota GR86\/BRZ\u003c\/li\u003e\n\u003cli\u003eEnd plates only - main wing, brackets and trunk bracket not included\u003c\/li\u003e\n\u003cli\u003eMatching 2x2 twill weave and high-gloss finish\u003c\/li\u003e\n\u003cli\u003eWhat's in the box:\u003c\/li\u003e\n\u003cli\u003e1 x Pair of ADRO Pre-Preg Carbon Fibre Flat End Plates (LH + RH)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x pair of pre-preg carbon fibre flat end plates (left and right)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eADRO AT-R1 swan neck wing for BMW M3 F80 and M4 F82\u003c\/li\u003e\n\u003cli\u003eADRO AT-R1 swan neck wing for BMW M2 F87 and 2 Series F22\u003c\/li\u003e\n\u003cli\u003eADRO AT-R1 swan neck wing for Toyota GR86 \/ Subaru BRZ\u003c\/li\u003e\n\u003cli\u003eEnd plates only; the AT-R1 wing is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupplied, fitted and finished by Forge Automotive\u003c\/h3\u003e\n\u003cp\u003eForge Automotive can fit these end plates at either of our sites: Darwen in the North West or Gildersome, Leeds in Yorkshire. Forge Automotive can also finish these end plates before fitting: paint protection film (PPF) to guard the carbon, a colour change or satin wrap, or colour matching to the car. Ask when ordering. See more \u003ca href=\"\/collections\/bmw-m3-f80\"\u003eBMW M3 F80 parts\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is pre-preg carbon fibre?\u003c\/strong\u003e\u003cbr\u003ePre-preg is carbon cloth that arrives from the mill already impregnated with a measured amount of resin. The part is laid up in the mould and cured under heat and pressure, usually in an autoclave or oven. Because the resin content is controlled, the finished part is lighter, stiffer and more consistent than a hand-laid one, with a cleaner weave and better dimensional accuracy. It costs more to make, which is why pre-preg parts sit at the top of a range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does \"dry carbon\" mean?\u003c\/strong\u003e\u003cbr\u003eDry carbon is the everyday name for a pre-preg part: carbon fibre all the way through, rather than a carbon skin over a fibreglass or plastic base. The surface still has a clear lacquer, but there is no excess resin in the laminate, so the part is light and rigid.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a 2x2 twill weave?\u003c\/strong\u003e\u003cbr\u003eThe weave pattern in the carbon cloth. In a 2x2 twill each strand passes over two and under two, which gives the diagonal pattern BMW use on their own M Performance and M carbon parts. Choosing 2x2 means aftermarket and factory carbon on the same car match.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I look after a carbon fibre part?\u003c\/strong\u003e\u003cbr\u003eTreat the lacquer like paint: wash with pH-neutral shampoo, avoid harsh solvents, and wax or seal it. UV is what ages carbon, so a protected finish lasts longer. Forge Automotive can apply paint protection film to any carbon part before fitting, which guards against stone chips and keeps the weave clear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this include the full AT-R1 wing assembly?\u003c\/strong\u003e\u003cbr\u003eNo. This product includes only the flat end plates. The main wing plate, aluminium brackets and trunk bracket are not included and must be purchased separately as part of the AT-R1 swan neck wing kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich cars is the AT-R1 swan neck wing available for?\u003c\/strong\u003e\u003cbr\u003eThe ADRO AT-R1 swan neck wing is available for the BMW F8X M3\/M4, BMW F87 M2 and Toyota GR86\/Subaru BRZ. These flat end plates are compatible with all three AT-R1 variants.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between flat and standard end plates?\u003c\/strong\u003e\u003cbr\u003eStandard end plates have a curved profile; the flat end plates give the wing a wider, more bold RS-specification appearance with greater visual presence and a more competition-oriented aesthetic.\u003c\/p\u003e","brand":"ADRO","offers":[{"title":"Default Title","offer_id":52913593385191,"sku":"A20A10-2201","price":799.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6601\/8535\/files\/universal-pre-preg-carbon-fibre-at-r1-flat-end-plates-by-adro-adro-rear-wings-5961703.webp?v=1792960076","url":"https:\/\/www.forgeautomotive.store\/products\/adro-at-r1-swan-neck-wing-pre-preg-carbon-fibre-flat-end-plates-by-adro","provider":"Forge Automotive","version":"1.0","type":"link"}