BMW F Series Pre-Preg Carbon Fibre Wing Mirror Covers by FORM (2012-2019)

A direct replacement for the OEM mirror caps, these covers swap painted plastic for pre-preg carbon fibre across BMW's F-chassis range, the F87 M2 included. Moulded using autoclave-cured, pre-preg techniques for accurate fit, a consistent weave and lasting durability. Replacement fitment, not an overlay. Forge Automotive can supply these mirror covers on their own, or fit them at our Darwen or Leeds site.

Key features

• Full pre-preg (dry) carbon fibre construction in a 2x2 weave
• Autoclave-cured for improved fit, finish and durability
• Direct replacement for the OEM mirror covers - not a stick-on overlay
• Lighter than the factory caps
• Supplied as a pair, left and right side

What's in the box

• 2 x pre-preg carbon fibre mirror caps (left and right)

Fitment

• BMW 1 Series (2010-2019, F20 F21)
• BMW 2 Series (2012+, F22 F23)
• BMW 3 Series (2011-2019, F30 F31 F34 F35)
• BMW 4 Series (2012-2019, F32 F33 F36)
• BMW i3 (2013+, I01)
• BMW X1 (2012-2015, X84)
• BMW M2 (2015-2018, F87)

Supplied, fitted and finished by Forge Automotive

Forge Automotive can fit these mirror covers at either of our sites: Darwen in the North West or Gildersome, Leeds in Yorkshire. Forge Automotive can also finish these mirror covers before fitting: paint protection film (PPF) to guard the carbon, a colour change or satin wrap, or colour matching to the car. Ask when ordering. See more BMW 1 Series F20/F21 parts.

Common questions

What is pre-preg carbon fibre?
Pre-preg is carbon cloth that arrives from the mill already impregnated with a measured amount of resin. The part is laid up in the mould and cured under heat and pressure, usually in an autoclave or oven. Because the resin content is controlled, the finished part is lighter, stiffer and more consistent than a hand-laid one, with a cleaner weave and better dimensional accuracy. It costs more to make, which is why pre-preg parts sit at the top of a range.

What does "dry carbon" mean?
Dry carbon is the everyday name for a pre-preg part: carbon fibre all the way through, rather than a carbon skin over a fibreglass or plastic base. The surface still has a clear lacquer, but there is no excess resin in the laminate, so the part is light and rigid.

What is a 2x2 twill weave?
The weave pattern in the carbon cloth. In a 2x2 twill each strand passes over two and under two, which gives the diagonal pattern BMW use on their own M Performance and M carbon parts. Choosing 2x2 means aftermarket and factory carbon on the same car match.

How do I look after a carbon fibre part?
Treat the lacquer like paint: wash with pH-neutral shampoo, avoid harsh solvents, and wax or seal it. UV is what ages carbon, so a protected finish lasts longer. Forge Automotive can apply paint protection film to any carbon part before fitting, which guards against stone chips and keeps the weave clear.

Fitting is available on every part at our North West (Darwen) and Yorkshire (Leeds) workshops. Prefer to fit it yourself? Fitting instructions ship with every part.

In-stock parts ship in 3–5 working days, fully insured. Every part is fitment-checked before dispatch.

Covered by the manufacturer warranty. Fitting through our workshop keeps it intact.