BMW M2 G87 Carbon Fibre V2 Front Lip for ADRO Front Bumper by Adro (2023 on)

Upgrade the front-end presence of your BMW G87 M2 with the Carbon Fibre Front Lip V2 by ADRO - engineered exclusively for use with the ADRO front bumper. Representing the evolved specification over the V1, the V2 front lip delivers a more pronounced lower profile and wider stance, completing the ADRO front bumper's full aerodynamic and visual intent. Forge Automotive supplies this front lip and can fit it at our Darwen and Leeds sites.

Constructed from high-quality pre-preg carbon fibre with a deep gloss finish, the V2 lip integrates seamlessly into the ADRO bumper's existing geometry for a motorsport-inspired result that appears wider, lower and more purposeful from every angle.

Note: This lip is designed exclusively for the ADRO front bumper for the BMW G87 M2. Not compatible with the OEM factory front bumper.

Key features

• Pre-preg carbon fibre with deep high-gloss finish
• V2 specification - more bold profile and wider stance than V1
• Engineered exclusively for the ADRO G87 M2 front bumper
• Direct fitment to ADRO bumper - no modification required
• V1 also available - see separate listing for comparison

What's in the box

• 1 x pre-preg carbon fibre V2 front lip

Fitment

• BMW M2 G87 (2023 on) with the ADRO front bumper fitted
• Not for the factory front bumper

Supplied, fitted and finished by Forge Automotive

Forge Automotive can fit this front lip at either of our sites: Darwen in the North West or Gildersome, Leeds in Yorkshire. Forge Automotive can also finish this front lip before fitting: paint protection film (PPF) to guard the carbon, a colour change or satin wrap, or colour matching to the car. Ask when ordering. See more BMW M2 G87 parts.

Common questions

What is pre-preg carbon fibre?
Pre-preg is carbon cloth that arrives from the mill already impregnated with a measured amount of resin. The part is laid up in the mould and cured under heat and pressure, usually in an autoclave or oven. Because the resin content is controlled, the finished part is lighter, stiffer and more consistent than a hand-laid one, with a cleaner weave and better dimensional accuracy. It costs more to make, which is why pre-preg parts sit at the top of a range.

What does "dry carbon" mean?
Dry carbon is the everyday name for a pre-preg part: carbon fibre all the way through, rather than a carbon skin over a fibreglass or plastic base. The surface still has a clear lacquer, but there is no excess resin in the laminate, so the part is light and rigid.

What is a 2x2 twill weave?
The weave pattern in the carbon cloth. In a 2x2 twill each strand passes over two and under two, which gives the diagonal pattern BMW use on their own M Performance and M carbon parts. Choosing 2x2 means aftermarket and factory carbon on the same car match.

How do I look after a carbon fibre part?
Treat the lacquer like paint: wash with pH-neutral shampoo, avoid harsh solvents, and wax or seal it. UV is what ages carbon, so a protected finish lasts longer. Forge Automotive can apply paint protection film to any carbon part before fitting, which guards against stone chips and keeps the weave clear.

What is the difference between V1 and V2 ADRO front lip for the G87 M2?
The V2 gives a more pronounced lower profile and wider stance than the V1 - delivering a more bold and commanding front-end appearance. Both require the ADRO front bumper.

Does the ADRO front bumper come with this product?
No. This listing is for the V2 front lip only. The ADRO front bumper is sold separately.

Fitting is available on every part at our North West (Darwen) and Yorkshire (Leeds) workshops. Prefer to fit it yourself? Fitting instructions ship with every part.

In-stock parts ship in 3–5 working days, fully insured. Every part is fitment-checked before dispatch.

Covered by the manufacturer warranty. Fitting through our workshop keeps it intact.