BMW M2 G87 TR87 Pre-Preg Carbon Fibre Flat Front Splitter by TREVORA (2023 on)

TREVORA TR87 flat front splitter for the BMW M2 G87 in pre-preg carbon fibre, a three-piece design that runs with or without its outer winglets, with a full fixing kit. Forge Automotive supplies this splitter and can fit it at our Darwen and Leeds sites.

Key features

• 2x2 twill pre-preg carbon fibre throughout - same specification as BMW M Performance carbon
• 3-piece design: run with or without outer winglets (both included in kit)
• UK-designed and manufactured by TREVORA - dedicated G87 M2 specialists
• CAD-designed for factory-level fitment using OEM bolt points
• Full hardware kit included: screws, nuts, bolts, washers, 3M VHB tape (pre-applied)
• TUV approval currently pending

What's in the box

• 1 x pre-preg carbon fibre centre front splitter
• 2 x pre-preg carbon fibre outer sections (left and right)
• Self-tapping screws, nuts, bolts and washers
• 3M VHB tape pre-applied

Fitment

• BMW M2 2023 on, Coupe, 3-piece, winglets optional

Supplied, fitted and finished by Forge Automotive

Forge Automotive can fit this splitter at either of our sites: Darwen in the North West or Gildersome, Leeds in Yorkshire. Forge Automotive can also finish this splitter before fitting: paint protection film (PPF) to guard the carbon, a colour change or satin wrap, or colour matching to the car. Ask when ordering. See more BMW M2 G87 parts.

Common questions

What is pre-preg carbon fibre?
Pre-preg is carbon cloth that arrives from the mill already impregnated with a measured amount of resin. The part is laid up in the mould and cured under heat and pressure, usually in an autoclave or oven. Because the resin content is controlled, the finished part is lighter, stiffer and more consistent than a hand-laid one, with a cleaner weave and better dimensional accuracy. It costs more to make, which is why pre-preg parts sit at the top of a range.

What does "dry carbon" mean?
Dry carbon is the everyday name for a pre-preg part: carbon fibre all the way through, rather than a carbon skin over a fibreglass or plastic base. The surface still has a clear lacquer, but there is no excess resin in the laminate, so the part is light and rigid.

What is a 2x2 twill weave?
The weave pattern in the carbon cloth. In a 2x2 twill each strand passes over two and under two, which gives the diagonal pattern BMW use on their own M Performance and M carbon parts. Choosing 2x2 means aftermarket and factory carbon on the same car match.

How do I look after a carbon fibre part?
Treat the lacquer like paint: wash with pH-neutral shampoo, avoid harsh solvents, and wax or seal it. UV is what ages carbon, so a protected finish lasts longer. Forge Automotive can apply paint protection film to any carbon part before fitting, which guards against stone chips and keeps the weave clear.

What is the difference between the flat splitter and the winged version?
Both are 3-piece TR87 pre-preg carbon splitters for the G87 M2. The flat version can be run with or without the included outer winglets, giving flexibility between a clean look and a wider competition look. The winged version features a specific outer winglet design. View both product pages to compare.

Can I run the flat splitter without the outer winglets?
Yes. The 3-piece construction allows you to run just the centre section for a cleaner, more restrained front appearance. All three pieces are included so you can change the configuration at any time.

Can I combine this with other TR87 components?
Yes. The flat front splitter is designed as part of TREVORA's full TR87 body kit for the G87 M2, including side skirts, rear spoiler, rear diffuser, adjustable rear wing and more.

Is it TUV approved?
TREVORA say TUV approval for the TR87 range is pending and not yet guaranteed. Ask before ordering if you need it for your region.

Fitting is available on every part at our North West (Darwen) and Yorkshire (Leeds) workshops. Prefer to fit it yourself? Fitting instructions ship with every part.

In-stock parts ship in 3–5 working days, fully insured. Every part is fitment-checked before dispatch.

Covered by the manufacturer warranty. Fitting through our workshop keeps it intact.