BMW M2 G87 TR87 Pre-Preg Carbon Fibre Front Splitter with Winglets by TREVORA (2023 on)

Designed and developed in the United Kingdom, TREVORA has set the aftermarket styling benchmark for the BMW G87 M2 platform. Forge Automotive can supply this splitter on its own, or fit it at our Darwen or Leeds site.

The carbon fibre front splitter, shown here with the 'winglet' option, is the perfect blend of sporty, track inspired design with an original-manufacturer feel. It's what the vehicle should have been delivered with from the factory.

Key features

• Exclusive, motorsport-inspired design
• High-quality, lightweight 2x2 twill pre-preg carbon fibre components
• Advanced computer-aided design (CAD) methods for a perfect fit
• Improves aerodynamics, reducing drag and increasing downforce
• Components include: front splitter, front bonnet, side fender trim, side skirts, rear wing, and rear bumper spats

What's in the box

• 1 x pre-preg carbon fibre centre front splitter
• 2 x pre-preg carbon fibre side winglets (left and right)
• 9 x self-tapping screws
• 4 x nuts, bolts and washers
• 3M VHB tape pre-applied

Fitment

• BMW M2 G87 (2023 on)

Supplied, fitted and finished by Forge Automotive

Forge Automotive can fit this splitter at either of our sites: Darwen in the North West or Gildersome, Leeds in Yorkshire. Forge Automotive can also finish this splitter before fitting: paint protection film (PPF) to guard the carbon, a colour change or satin wrap, or colour matching to the car. Ask when ordering. See more BMW M2 G87 parts.

Common questions

What is pre-preg carbon fibre?
Pre-preg is carbon cloth that arrives from the mill already impregnated with a measured amount of resin. The part is laid up in the mould and cured under heat and pressure, usually in an autoclave or oven. Because the resin content is controlled, the finished part is lighter, stiffer and more consistent than a hand-laid one, with a cleaner weave and better dimensional accuracy. It costs more to make, which is why pre-preg parts sit at the top of a range.

What does "dry carbon" mean?
Dry carbon is the everyday name for a pre-preg part: carbon fibre all the way through, rather than a carbon skin over a fibreglass or plastic base. The surface still has a clear lacquer, but there is no excess resin in the laminate, so the part is light and rigid.

What is a 2x2 twill weave?
The weave pattern in the carbon cloth. In a 2x2 twill each strand passes over two and under two, which gives the diagonal pattern BMW use on their own M Performance and M carbon parts. Choosing 2x2 means aftermarket and factory carbon on the same car match.

How do I look after a carbon fibre part?
Treat the lacquer like paint: wash with pH-neutral shampoo, avoid harsh solvents, and wax or seal it. UV is what ages carbon, so a protected finish lasts longer. Forge Automotive can apply paint protection film to any carbon part before fitting, which guards against stone chips and keeps the weave clear.

Is it TUV approved?
TREVORA say TUV approval for the TR87 range is pending and not yet guaranteed. Ask before ordering if you need it for your region.

Fitting is available on every part at our North West (Darwen) and Yorkshire (Leeds) workshops. Prefer to fit it yourself? Fitting instructions ship with every part.

In-stock parts ship in 3–5 working days, fully insured. Every part is fitment-checked before dispatch.

Covered by the manufacturer warranty. Fitting through our workshop keeps it intact.