BMW M3 F80 & M4 F82 F83 Pre-Preg Carbon Fibre Front Bumper Canards by Adro (2014-2020)

Get an edge at the racetrack or just add some more style to your BMW. The ADRO carbon fiber canards will be an easy to install modification for any M car. For the most part, canards are universal, but ADRO specifically designed these to fit the styling of both the BMW F80 M3 and F82 M4. These canards are subtle, made from the highest-quality handcrafted carbon fiber, and are proven to increase downforce for better cornering performance. This is one of the easiest ways to get both a cosmetic and a performance benefit in one product that doesn't require a ton of installation time. Get ready to dominate the street and the track with these carbon fiber front bumper canards for the BMW M3 and M4. Forge Automotive can supply these canards on their own, or fit them at our Darwen or Leeds site.

Key features

• Front bumper canards, left and right
• Pre-preg carbon fibre, 2x2 weave
• Shaped to the F80/F82 bumper, hardware included

What's in the box

• 2 x pre-preg carbon fibre front canards (left and right)
• Fitting hardware

Fitment

• BMW M3 (2014 to 2020, F80
• BMW M4 (2014 to 2020, F82 F83)

Supplied, fitted and finished by Forge Automotive

Forge Automotive can fit these canards at either of our sites: Darwen in the North West or Gildersome, Leeds in Yorkshire. Forge Automotive can also finish these canards before fitting: paint protection film (PPF) to guard the carbon, a colour change or satin wrap, or colour matching to the car. Ask when ordering. See more BMW M3 F80 parts.

Common questions

What is pre-preg carbon fibre?
Pre-preg is carbon cloth that arrives from the mill already impregnated with a measured amount of resin. The part is laid up in the mould and cured under heat and pressure, usually in an autoclave or oven. Because the resin content is controlled, the finished part is lighter, stiffer and more consistent than a hand-laid one, with a cleaner weave and better dimensional accuracy. It costs more to make, which is why pre-preg parts sit at the top of a range.

What does "dry carbon" mean?
Dry carbon is the everyday name for a pre-preg part: carbon fibre all the way through, rather than a carbon skin over a fibreglass or plastic base. The surface still has a clear lacquer, but there is no excess resin in the laminate, so the part is light and rigid.

What is a 2x2 twill weave?
The weave pattern in the carbon cloth. In a 2x2 twill each strand passes over two and under two, which gives the diagonal pattern BMW use on their own M Performance and M carbon parts. Choosing 2x2 means aftermarket and factory carbon on the same car match.

How do I look after a carbon fibre part?
Treat the lacquer like paint: wash with pH-neutral shampoo, avoid harsh solvents, and wax or seal it. UV is what ages carbon, so a protected finish lasts longer. Forge Automotive can apply paint protection film to any carbon part before fitting, which guards against stone chips and keeps the weave clear.

Fitting is available on every part at our North West (Darwen) and Yorkshire (Leeds) workshops. Prefer to fit it yourself? Fitting instructions ship with every part.

In-stock parts ship in 3–5 working days, fully insured. Every part is fitment-checked before dispatch.

Covered by the manufacturer warranty. Fitting through our workshop keeps it intact.