BMW M3 G80 G81 Pre-Preg Carbon Fibre PR-1 Side Skirts by TREVORA (2021 on)

Are you looking to give your BMW M3 G80 an even more bold and aerodynamic look? The TREVORA Pre-Preg Carbon Fibre PR-1 Side Skirts are the perfect choice for you. Developed with pre-preg carbon fibre, these side skirts will alter the look of your vehicle from all angles. Available from Forge Automotive supply only, or fitted at our sites in Darwen and Leeds.

The side skirts give an improved and broader appearance to the whole car, creating an attractive and dynamic effect. Plus, they give tremendous aerodynamic benefits while driving - these side skirts have been tested on a variety of different surfaces, achieving maximum results.

No modifications are required before installation - all that’s needed is what’s included in the box. TREVORA guarantees a perfect fitment with their side skirts as they have tested it rigorously on several BMW M3 G80 vehicles prior to releasing them to their customers. It’s easy enough for anyone to install at home using simple tools!

These lightweight side skirts made of pre-preg carbon fibre provide strong resistance against weather conditions making them long-lasting and reliable products. Get yourself the TREVORA Pre-Preg Carbon Fibre PR-1 Side Skirts today and make your BMW stand out from all other cars.

Key features

• PR-1 flat profile side skirts, left and right
• Dry pre-preg carbon fibre, 2x2 twill weave
• No modifications, fitting hardware included

What's in the box

• 2 x dry pre-preg carbon fibre PR-1 side skirts (left and right)
• Fitting hardware

Fitment

• BMW M3 Saloon (2021+, G80)
• BMW M3 Touring (2021+, G81)

Supplied, fitted and finished by Forge Automotive

Forge Automotive can fit these side skirts at either of our sites: Darwen in the North West or Gildersome, Leeds in Yorkshire. Forge Automotive can also finish these side skirts before fitting: paint protection film (PPF) to guard the carbon, a colour change or satin wrap, or colour matching to the car. Ask when ordering. See more BMW M3 G80/G81 parts.

Common questions

What is pre-preg carbon fibre?
Pre-preg is carbon cloth that arrives from the mill already impregnated with a measured amount of resin. The part is laid up in the mould and cured under heat and pressure, usually in an autoclave or oven. Because the resin content is controlled, the finished part is lighter, stiffer and more consistent than a hand-laid one, with a cleaner weave and better dimensional accuracy. It costs more to make, which is why pre-preg parts sit at the top of a range.

What does "dry carbon" mean?
Dry carbon is the everyday name for a pre-preg part: carbon fibre all the way through, rather than a carbon skin over a fibreglass or plastic base. The surface still has a clear lacquer, but there is no excess resin in the laminate, so the part is light and rigid.

What is a 2x2 twill weave?
The weave pattern in the carbon cloth. In a 2x2 twill each strand passes over two and under two, which gives the diagonal pattern BMW use on their own M Performance and M carbon parts. Choosing 2x2 means aftermarket and factory carbon on the same car match.

How do I look after a carbon fibre part?
Treat the lacquer like paint: wash with pH-neutral shampoo, avoid harsh solvents, and wax or seal it. UV is what ages carbon, so a protected finish lasts longer. Forge Automotive can apply paint protection film to any carbon part before fitting, which guards against stone chips and keeps the weave clear.

Fitting is available on every part at our North West (Darwen) and Yorkshire (Leeds) workshops. Prefer to fit it yourself? Fitting instructions ship with every part.

In-stock parts ship in 3–5 working days, fully insured. Every part is fitment-checked before dispatch.

Covered by the manufacturer warranty. Fitting through our workshop keeps it intact.