BMW 2 Series & M240i G42 iDrive 7 Pre-Preg Carbon Fibre Interior Trim Set by FORM (2021-2022)

Looking to take your interior to the next level? This is the FORM Full Interior Set for the BMW 2 Series G42, M240i & BMW 3 Series G20 G21. Forge Automotive supplies this trim set and can fit it at our Darwen and Leeds sites.

This Interior Kit is a full kit which installs by 3M-Tape, straight over your existing cockpit interior. No removal or drilling required. FORM recommend applying the adhesive promoter (included in your set) and leave to set for 2 minutes before peeling off the cover of the 3M-Tape and applying.

Made from pre-preg carbon fibre, it creates a long-lasting, high quality gloss finish to the interior.

Note: This is for the pre-facelift interior only on the 2 Series G42 & 3 Series G20 G21. Does not fit with the new iDrive 8 System.

Key features

• Full interior trim set for the iDrive 7 interior
• Pre-preg carbon fibre, 2x2 weave, gloss or matte
• Fits over the existing trim with 3M tape, no removal or drilling

What's in the box

• 1 x pre-preg carbon fibre full interior trim set
• 3M tape pre-applied
• Adhesive promoter

Fitment

• BMW 2 Series (2021-2022, G42)
• BMW M240i (2021-2022, G42)

Good to know

• Listed for right hand drive cars. A left hand drive version is available on request.
• Choose the finish.
• For the pre-facelift iDrive 7 interior only. It does not fit the iDrive 8 system.

Supplied, fitted and finished by Forge Automotive

Forge Automotive can fit this trim set at either of our sites: Darwen in the North West or Gildersome, Leeds in Yorkshire. Forge Automotive can also finish this trim set before fitting with a satin or colour wrap over the carbon. Ask when ordering. See more BMW 2 Series G42 parts.

Common questions

What is pre-preg carbon fibre?
Pre-preg is carbon cloth that arrives from the mill already impregnated with a measured amount of resin. The part is laid up in the mould and cured under heat and pressure, usually in an autoclave or oven. Because the resin content is controlled, the finished part is lighter, stiffer and more consistent than a hand-laid one, with a cleaner weave and better dimensional accuracy. It costs more to make, which is why pre-preg parts sit at the top of a range.

What does "dry carbon" mean?
Dry carbon is the everyday name for a pre-preg part: carbon fibre all the way through, rather than a carbon skin over a fibreglass or plastic base. The surface still has a clear lacquer, but there is no excess resin in the laminate, so the part is light and rigid.

What is a 2x2 twill weave?
The weave pattern in the carbon cloth. In a 2x2 twill each strand passes over two and under two, which gives the diagonal pattern BMW use on their own M Performance and M carbon parts. Choosing 2x2 means aftermarket and factory carbon on the same car match.

How do I look after a carbon fibre part?
Treat the lacquer like paint: wash with pH-neutral shampoo, avoid harsh solvents, and wax or seal it. UV is what ages carbon, so a protected finish lasts longer. Forge Automotive can apply paint protection film to any carbon part before fitting, which guards against stone chips and keeps the weave clear.

Fitting is available on every part at our North West (Darwen) and Yorkshire (Leeds) workshops. Prefer to fit it yourself? Fitting instructions ship with every part.

In-stock parts ship in 3–5 working days, fully insured. Every part is fitment-checked before dispatch.

Covered by the manufacturer warranty. Fitting through our workshop keeps it intact.