BMW 2 Series F22 & M2 F87 Carbon Fibre Performance Rear Spoiler by FORM (2014-2021)

A performance-profile boot lid spoiler for the F22 2 Series and F87 M2, moulded in CFRP carbon fibre with a 2x2 weave and gloss finish. It follows the OEM Performance line, adding definition to the rear deck without disturbing the factory proportions. Supplied ready to fit with tape pre-applied. Forge Automotive can supply this spoiler on its own, or fit it at our Darwen or Leeds site.

Key features

• CFRP carbon fibre construction with a 2x2 gloss weave
• OEM-style fit that follows the factory boot lid line
• Direct fitment with pre-applied 3M double-sided tape and adhesive promoter
• Adds rear definition on a standard car or alongside a wider styling build
• Single-piece design, supplied ready to install

What's in the box

• 1 x carbon fibre Performance spoiler
• 3M double sided tape pre-applied
• 1 x adhesive promoter

Fitment

• BMW 2 Series (2014-2020, F22)
• BMW M2 (2015-2018, F87)
• BMW M2 Competition (2018-2021, F87)

Supplied, fitted and finished by Forge Automotive

Forge Automotive can fit this spoiler at either of our sites: Darwen in the North West or Gildersome, Leeds in Yorkshire. Forge Automotive can also finish this spoiler before fitting: paint protection film (PPF) to guard the carbon, a colour change or satin wrap, or colour matching to the car. Ask when ordering. See more BMW 2 Series F22/F23 parts.

Common questions

What is wet-lay carbon fibre (CFRP)?
Wet-lay carbon is made by laying dry carbon cloth into the mould and applying resin by hand, then curing at room temperature or low heat, sometimes over a fibreglass or composite base. It gives the same 2x2 weave look as pre-preg for less money. The trade-off is more resin and a little more weight, and the finish depends more on the maker, which is why we only stock wet-lay parts from brands whose quality we have seen.

Is wet-lay carbon strong enough for a splitter or diffuser?
Yes for road use. The part is still carbon reinforced and stiff enough for a splitter, skirt or diffuser. If you want the lightest, most rigid option, choose the pre-preg version where the range has one.

What is a 2x2 twill weave?
The weave pattern in the carbon cloth. In a 2x2 twill each strand passes over two and under two, which gives the diagonal pattern BMW use on their own M Performance and M carbon parts. Choosing 2x2 means aftermarket and factory carbon on the same car match.

How do I look after a carbon fibre part?
Treat the lacquer like paint: wash with pH-neutral shampoo, avoid harsh solvents, and wax or seal it. UV is what ages carbon, so a protected finish lasts longer. Forge Automotive can apply paint protection film to any carbon part before fitting, which guards against stone chips and keeps the weave clear.

Fitting is available on every part at our North West (Darwen) and Yorkshire (Leeds) workshops. Prefer to fit it yourself? Fitting instructions ship with every part.

In-stock parts ship in 3–5 working days, fully insured. Every part is fitment-checked before dispatch.

Covered by the manufacturer warranty. Fitting through our workshop keeps it intact.