BMW M Sport Pre-Preg Carbon Fibre Steering Wheel Trim by FORM (2018-2024)

The steering wheel is the centre piece of the cabin and is first touch point you have with the car. This carbon steering wheel trim is built to improve the look of your interior. Often overlooked, this can change the feel of your car from the drivers seat and really looks the part. Forge Automotive can supply this steering wheel trim on its own, or fit it at our Darwen or Leeds site.

This product is offered in either a Gloss Carbon Fibre or Matte Carbon Fibre finish. Yo can match this with the rest of your interior to give the ultimate look!

Note: Please choose if you have a heated steering wheel function.

Key features

• Steering wheel trim accent for M Sport wheels
• Pre-preg carbon fibre, 2x2 weave, gloss or matte
• Heated and non-heated wheel versions
• Fitted with 3M tape strips

What's in the box

• 1 x pre-preg carbon fibre steering trim accent
• 3M tape strips
• Adhesive promoter

Fitment

• BMW 1 Series (2019-2024, F40)
• BMW 2 Series Gran Coupe (2020-2024, F44)
• BMW 2 Series / M240i (2021-2024, G42)
• BMW 3 Series / M3 (2018+, G20 G21 G80)
• BMW 4 Series / M4 (2020+, G22 G26 G82)
• BMW 5 Series / M5 (2017-2023, G30 G31 F90)
• BMW 7 Series (2015+, G11 G12)
• BMW 8 Series / M8 (2018+, G14 G15 G16 F91 F92 F93)
• BMW X3 / X3M Pre-LCI (2017-2021, G01 F97)
• BMW X4 / X4M Pre-LCI (2018-2021, G02 F98)
• BMW X5 / X5M Pre-LCI (2019-2021, G05 F95)

Good to know

• Choose heated or non-heated steering wheel and the finish.
• FORM state this is not compatible with the 2024 on updated steering wheel.

Supplied, fitted and finished by Forge Automotive

Forge Automotive can fit this steering wheel trim at either of our sites: Darwen in the North West or Gildersome, Leeds in Yorkshire. Forge Automotive can also finish this steering wheel trim before fitting with a satin or colour wrap over the carbon. Ask when ordering. See more BMW 1 Series F40 parts.

Common questions

What is pre-preg carbon fibre?
Pre-preg is carbon cloth that arrives from the mill already impregnated with a measured amount of resin. The part is laid up in the mould and cured under heat and pressure, usually in an autoclave or oven. Because the resin content is controlled, the finished part is lighter, stiffer and more consistent than a hand-laid one, with a cleaner weave and better dimensional accuracy. It costs more to make, which is why pre-preg parts sit at the top of a range.

What does "dry carbon" mean?
Dry carbon is the everyday name for a pre-preg part: carbon fibre all the way through, rather than a carbon skin over a fibreglass or plastic base. The surface still has a clear lacquer, but there is no excess resin in the laminate, so the part is light and rigid.

What is a 2x2 twill weave?
The weave pattern in the carbon cloth. In a 2x2 twill each strand passes over two and under two, which gives the diagonal pattern BMW use on their own M Performance and M carbon parts. Choosing 2x2 means aftermarket and factory carbon on the same car match.

How do I look after a carbon fibre part?
Treat the lacquer like paint: wash with pH-neutral shampoo, avoid harsh solvents, and wax or seal it. UV is what ages carbon, so a protected finish lasts longer. Forge Automotive can apply paint protection film to any carbon part before fitting, which guards against stone chips and keeps the weave clear.

Fitting is available on every part at our North West (Darwen) and Yorkshire (Leeds) workshops. Prefer to fit it yourself? Fitting instructions ship with every part.

In-stock parts ship in 3–5 working days, fully insured. Every part is fitment-checked before dispatch.

Covered by the manufacturer warranty. Fitting through our workshop keeps it intact.