BMW M2 Competition F87 Carbon Fibre CS Front Splitter by FORM (2018-2021)

This is the FORM Industries Carbon Fibre CS Front Splitter for the BMW M2 Competition. The perfect OEM+ addition to the front end of the car, this splitter has 2x2 weave carbon fibre with a gloss finish. Forge Automotive supplies this splitter and can fit it at our Darwen and Leeds sites.

The CS style design adds subtle presence and does so with extremely good fitment. Easy to fit, the splitter uses a mixture of OEM bolts and self-tapping bolts that screw into the bumper for a secure attachment.

FORM also make a pre-preg (Pro) version of this splitter, listed separately.

Key features

• CS style front splitter
• Carbon fibre (CFRP, 2x2 weave), gloss finish
• Fits with OEM bolts and self-tapping bolts
• A pre-preg (Pro) version is listed separately

What's in the box

• 1 x carbon fibre CS front splitter
• 3M double sided tape pre-applied
• Fitting hardware

Fitment

• BMW M2 Competition (2018-2021)

Good to know

• Not compatible with the original M2 (2015 to 2018).

Supplied, fitted and finished by Forge Automotive

Forge Automotive can fit this splitter at either of our sites: Darwen in the North West or Gildersome, Leeds in Yorkshire. Forge Automotive can also finish this splitter before fitting: paint protection film (PPF) to guard the carbon, a colour change or satin wrap, or colour matching to the car. Ask when ordering. See more BMW M2 F87 parts.

Common questions

What is wet-lay carbon fibre (CFRP)?
Wet-lay carbon is made by laying dry carbon cloth into the mould and applying resin by hand, then curing at room temperature or low heat, sometimes over a fibreglass or composite base. It gives the same 2x2 weave look as pre-preg for less money. The trade-off is more resin and a little more weight, and the finish depends more on the maker, which is why we only stock wet-lay parts from brands whose quality we have seen.

Is wet-lay carbon strong enough for a splitter or diffuser?
Yes for road use. The part is still carbon reinforced and stiff enough for a splitter, skirt or diffuser. If you want the lightest, most rigid option, choose the pre-preg version where the range has one.

What is a 2x2 twill weave?
The weave pattern in the carbon cloth. In a 2x2 twill each strand passes over two and under two, which gives the diagonal pattern BMW use on their own M Performance and M carbon parts. Choosing 2x2 means aftermarket and factory carbon on the same car match.

How do I look after a carbon fibre part?
Treat the lacquer like paint: wash with pH-neutral shampoo, avoid harsh solvents, and wax or seal it. UV is what ages carbon, so a protected finish lasts longer. Forge Automotive can apply paint protection film to any carbon part before fitting, which guards against stone chips and keeps the weave clear.

Fitting is available on every part at our North West (Darwen) and Yorkshire (Leeds) workshops. Prefer to fit it yourself? Fitting instructions ship with every part.

In-stock parts ship in 3–5 working days, fully insured. Every part is fitment-checked before dispatch.

Covered by the manufacturer warranty. Fitting through our workshop keeps it intact.