BMW M3 G80, M4 G82 & M2 G87 Pre-Preg Carbon Fibre Top Engine Bay Covers by FORM

FORM Industries top engine bay covers for the BMW M2 G87, M3 G80/G81 and M4 G82/G83, a pair in pre-preg carbon fibre with a 2x2 weave, made in left and right hand drive versions. Forge Automotive supplies these engine bay covers and can fit them at our Darwen and Leeds sites.

Key features

• Pair of top engine bay covers
• Pre-preg carbon fibre, 2x2 weave
• Left or right hand drive versions

What's in the box

• 2 x pre-preg carbon fibre engine covers

Fitment

• BMW M2 (2023+, G87)
• BMW M3 Saloon (2020+, G80)
• BMW M3 Touring (2022+ G81)
• BMW M4 Coupe (2020-2024, G82 Pre-LCI)
• BMW M4 Coupe (2024+, G82 LCI)
• BMW M4 Convertible (2020-2024, G83 Pre-LCI)
• BMW M4 Convertible (2024+, G83 LCI)

Good to know

• Choose the driving side.

Supplied, fitted and finished by Forge Automotive

Forge Automotive can fit these engine bay covers at either of our sites: Darwen in the North West or Gildersome, Leeds in Yorkshire. Forge Automotive can also finish these engine bay covers before fitting: paint protection film (PPF) to guard the carbon, a colour change or satin wrap, or colour matching to the car. Ask when ordering. See more BMW M2 G87 parts.

Common questions

What is pre-preg carbon fibre?
Pre-preg is carbon cloth that arrives from the mill already impregnated with a measured amount of resin. The part is laid up in the mould and cured under heat and pressure, usually in an autoclave or oven. Because the resin content is controlled, the finished part is lighter, stiffer and more consistent than a hand-laid one, with a cleaner weave and better dimensional accuracy. It costs more to make, which is why pre-preg parts sit at the top of a range.

What does "dry carbon" mean?
Dry carbon is the everyday name for a pre-preg part: carbon fibre all the way through, rather than a carbon skin over a fibreglass or plastic base. The surface still has a clear lacquer, but there is no excess resin in the laminate, so the part is light and rigid.

What is a 2x2 twill weave?
The weave pattern in the carbon cloth. In a 2x2 twill each strand passes over two and under two, which gives the diagonal pattern BMW use on their own M Performance and M carbon parts. Choosing 2x2 means aftermarket and factory carbon on the same car match.

How do I look after a carbon fibre part?
Treat the lacquer like paint: wash with pH-neutral shampoo, avoid harsh solvents, and wax or seal it. UV is what ages carbon, so a protected finish lasts longer. Forge Automotive can apply paint protection film to any carbon part before fitting, which guards against stone chips and keeps the weave clear.

Which version do I choose?
Pick the driving side of the car. The RHD and LHD sets differ.

Fitting is available on every part at our North West (Darwen) and Yorkshire (Leeds) workshops. Prefer to fit it yourself? Fitting instructions ship with every part.

In-stock parts ship in 3–5 working days, fully insured. Every part is fitment-checked before dispatch.

Covered by the manufacturer warranty. Fitting through our workshop keeps it intact.